|
eBay Auction Services
|
BETTER PACK®TAPE DISPENSER 555*REPAIR THIS ITEM NO SALE
WE DO EXPERT REPAIRS.*TRADE INS*TROUBLESHOOTING GUIDE
| Start Price |
USD 95.00 |
| Current Price |
USD 95.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Tuesday, October 07, 2008 |
| End Time |
Friday, October 17, 2008 |
| Location |
maspeth, NY |
|
See more about 'BETTER PACK®TAPE DISPENSER 555*REPAIR THIS ITEM NO SALE'
|
Description
WELCOME TO THE PATCOGROUP.COM IN MASPETH QUEENS NY 11378 THIS IS A SERVICE LISTING THIS DISPENSER IS NOT FOR SALE WE REAPIR ALL MODELS 95.00 LABOR PLUS PARTS IF NEEDED FULL SERVICING AND REFURBISHING INCLUDED WE WILL ADVISE U THE COST ON PARTS IF WE NEED ANY AND THAN YOU CAN PAY THROUGH PAYPAL OR A CREDIT CARD***** WE PRINT CUSTOM TAPE TOO** CHECK US OUT FOR A QUOTE REINFORCED GUMMED TAPE CUSTOM PRINTED 1 COLOR 10 ROLLS X 450 FEET EA 4500 FEET OF TAPE CUSTOM PRINTED FOR 39.00 PER CASE PLUS A 1 TIME ART AND PLATE AND SET UP CHARGE OF 75.00**U WILL NOT BE ABLE TO BEAT THAT???IF U LOOK AT WHAT U PAY PER FOOT UNPRINTED, U WILL SEE WHY THIS IS AN AWSOME DEAL******** EMAIL OR CALL IF INTERESTED 718 497 1527 THESE TIPS BELOW ARE GENUINE BETTER PACKAGES ® TIPS AND SO ARE ALL THE REPLACMENT PARTS PATCO USES... THIS SITE IS ALL GENUINE BETTER PACK AND WE STAND BEHIND THE MANUFACTURER ALL THE WAY SINCE 1954..... Preventive Maintenance Procedures Better Packages®tape dispensers and systems require minimal preventive maintenance and care. However the water activated tape used in tape dispensers produces a "dust" that if not removed periodically may reduce the performance of the unit. Minimal lubrication is required for the cutting blades. Oiling these blades lightly on a monthly basis will greatly extend the life and performance of the blades. Weekly washing of the water brushes will assure the most effective reactivation of the adhesive on the tape. On reinforced tape the adhesives are heavier, and during dispensing some of this wipes off on the brushes and runs into the water tank. If you do not wash the dispenser with warm water and mild soap weekly, the glue may accumulate and reduce the effectiveness of the moistening system by clogging the water brush bristles. The following suggested preventive maintenance schedule applies to all water activated tape machines listed in this web site. Weekly Wash water brushes with mild soap; rinse well. Clean any accumulated tape dust with a dry brush or blower. Wash water tank with mild soap; rinse well. Monthly Clean accumulated glue from blades. Apply light coating of light machine oil to back of blade. On Better Packages 555 models add a few drops of light machine oil to felt pads. Annually Thoroughly clean all accumulated pieces of tape, tape dust and any other foreign material from inside of machine with dry brush or blower. Clean bottom of heaters and pressure plates of accumulated glue. Oil upper and lower blades lightly with light machine oil. Clean all covers with a damp rag. WARNING! Never spray cleaning fluid or lubricant into the machine. Never clean or work on an electric or electronic dispenser with the power turned on. Always turn the power off and unplug the machine before servicing. Trouble Shooting Tips Following are simple troubleshooting tips to consider if there is a problem with your machine. A more complete discussion of troubleshooting techniques is contained in the operating manual for each machine. If the problem with your machine cannot be resolved with these tips or techniques in your manual, then you should contact your local authorized distributor Symptom Trouble Shooting Tips Symptom: Machine does not turn on (if electric). Tip(s): Check to see that unit is plugged in, and power light is "on." Symptom: No tape is dispensed. Tip(s): Check to see that tape is loaded in the basket. Check to verify the tape path is correct. Remove upper tape plate and look for small pieces of tape which may cause jamming. Check that the water brush(es) and water tank are properly inserted so they don't block the tape path. Symptom: Tape is not wet when it is dispensed. Tip(s): Check water level in tank. Check for proper location of water brush(es) and tank. Check brushes for excess glue build up or excess wear. Symptom: Tape does not stick well. Tip(s): Check water level, adjust if necessary. Check heater operation, adjust if necessary. Add water conditioner if water is "hard." Check condition of water brushes.
Place a Bid!
|
|
|
Search
Categories
 |
[home] [sitemap]
|